How to clean hardie siding

COLORPLUS TECHNOLOGY TECHNICAL ... - James Hardie Pros

Spot clean as needed – do not apply the cleaner unnecessarily to siding that does not require additional cleaning. Working area should be adjusted to accommodate drying times which can vary based on factors such as sun exposure, air temperature, siding color and other factors.

December 11th,2019

Finishing James Hardie TECHNICAL BULLETIN Siding …

Finishing James Hardie® Primed Siding Products (S-100) AuGuST 2014 #22 James Hardie developed the first factory applied primer for fiber cement siding. Our distinctive gold primer for HZ10® products and green primer for HZ5® products are climate-tested and engineered to enhance the performance of paint on James Hardie fiber cement siding.

December 11th,2019

COLORPLUS TECHNOLOGY TECHNICAL ... - James Hardie Pros

Spot clean as needed – do not apply the cleaner unnecessarily to siding that does not require additional cleaning. Working area should be adjusted to accommodate drying times which can vary based on factors such as sun exposure, air temperature, siding color and other factors.

December 11th,2019

HomeoWner care & maintenance guide for good ... - James …

Siding Brush Follow these recommendations to clean the exterior of your home and to help maintain the beauty and value of your James Hardie siding. • Wash down the exterior surfaces every 6 to 12 months with a garden hose to remove dirt and debris, gently clean the siding with the soft brush or wet soft cloth in a side to side motion in

December 11th,2019

HardieTrim Moulding Products - James Hardie Pros

• James Hardie does not warrant the usage of third party touch-up or paints used as touch-up on James Hardie ColorPlus products. • Ensure surface is clean, dry and free of dust, dirt, grease or debris. • On ColorPlus products, touch-up all field cut edges with ColorPlus Touch-Up edge coater to ensure consistent finish. PAINTING

December 11th,2019

TECHNICAL BULLE TIN Cleaning and Maintenance #20

James Hardie® Siding TECHNICAL BULLE TIN Cleaning and Maintenance JUNE 2013 #20 MaiNtENaNCE ... Gently clean the siding with the soft brush or wet soft cloth in a side to side motion in the direction of the plank siding. If cleaning panel, direction of the siding is up and down. Do not push soft brush or wet cloth too hard against product surface.

December 11th,2019

Cleaning James Hardie TECHNICAL BULLETIN ColorPlus #20

Cleaning James Hardie ... Gently clean the siding with the soft brush or wet soft cloth in a side to side motion in the direction of the plank siding. If cleaning panel, direction of the siding is up and down. Do not push soft brush or wet cloth too hard against product surface. Do …

December 11th,2019

HardieSoffit Installation Inst HZ10 0219 - James Hardie Pros

PAINTING JAMES HARDIE® SIDING AND TRIM PRODUCTS WITH COLORPLUS ® TECHNOLOGY When repainting ColorPlus products, James Hardie recommends the following regarding surface preparation and topcoat application: • Ensure the surface is clean, dry, and free of any dust, dirt, or mildew • Repriming is normally not necessary